Semmy Clay Moshi
Moshi,Tanzania
Summary
A resourceful Tanzanian board certified civil engineer who is vastly experienced in Contract management and site supervision for building and drainage construction works, construction contract management (local) and risk control of works and consultancy services in structural/civil engineering. Physically fit and able to work on-site and at remote locations. I am more than willing to undertake any work of a technical nature that falls within my ability with competence. I have and poses solid record of health, safety and environmental focus when working on big and small construction projects, and committed to my personal and professional development in any area that falls in my career expertise.
Dedicated professional with a strong background in civil engineering and structural design. Known for effective project supervision and commitment to safety, consistently delivering quality results in compliance with industry standards.
Overview
8
8
years of professional experience
1
1
Certification
Work History
Assistant Structural Engineer and Works inspector
BEZA CONSULTING ENGINEERS PLC LTD
, Tanzania
04.2023 - Current
- Reviewing initial contract documents for the project (works contract, design report, employer requirements and design drawings)
- Supervision and inspection of structural & architectural works for the camp buildings/ houses of the Engineer's and Employer's staff.
- Design and review for Foundation systems of shallow and deep foundation for Passenger terminal building, Air Traffic Control Tower (ATCT), Airport Main Fire Station, Metrological Centre Building, Power Station and Sub Stations (14 Nos).
- Assists to review structural drawings for Passenger terminal building, Air Traffic Control Tower (ATCT), Airport Main Fire Station, Metrological Centre Building, Power Station, Sub Stations and report to conformity to the applicable standards and project technical specifications.
- Examining and approving method statement for Passenger terminal building, Air Traffic Control Tower (ATCT), Airport Main Fire Station, Metrological Centre Building, Power Station, Sub Stations and tower crane foundation construction prior to general construction.
- Supervision and evaluating procedures for performing Dynamic Cone Penetration Testing, equipment specification, in-situ Raw Data Collection, data analysis and Point Bearing Capacity determination at an economical proposed Shallow foundation depth for BS EN ISO 22476-2:2005: Dynamic Cone Penetration in-situ Test for the excavated shallow foundation pits prior for pad foundation construction.
- Supervision of installation of Air Traffic Control Tower Bearing Replacement/Bored Cast-in-Place Friction Piles (Nominal Diameter size of Ø1000 mm, 20 m depth, 63 Nos) for Deep excavation (Drilling/Boring), Rebars preparation and installation with reference to cut off levels, Concrete pouring (accordance to BS 5328) and piles drilling & concrete record management to BS 8004 - 1986 Foundations.
- Supervision of Procedures for Pile Foundations (Replacement Piles) load tests for: - Axial Static Compression Load Test (with test loads -Working load 4135k.N Test load 6202k.N) for selected test piles for settlement determination at the estimated working load to BS 8004 - 1986 Foundations.
- Integrity test for all working piles following for structural soundness checking.
- Keeping and reporting daily records of plants/equipment, materials, labors, weather, events and daily status of progress of works done at site.
- Ensuring the Contractor's compliance to proper Healthy, Safety and Environmental practices at site.
- Supervision and inspection of main frame reinforced concrete structural elements (beams, slabs columns) and other structures (shear walls, drainage ditches, electrical trenches) reinforcement works to BS 8666: Bar bending and shapes., form-working to BS 5975: Safe working properties for Formwork, BS 5268: Sheet material shear stresses., concreting mixing, transportation, placing and laying to BS 8500-1 & 2: Designated mix and Structural steel works BS 5950 - 1: 2000 Structural use of steel in building as per designed and approved shop drawings.
- Supervision of Hollow Concrete Block Design Production process, Materials requirement Specifications, permissible Dimensions and Tolerances for (10 x 20 x 40 cm, 15 x 20 x 40 cm, 30 x 20 x 40 cm, 10 x 20 x 40 cm + 15 x 20 x 40 cm) sizes, Compressive Strength Testing and Quality Control procedures, Supervision of Construction of cavity walls with inner insulation air gap (5 cm) for insulation as per requirement for hollow blocks production and construction in BS 5628-1:2005 Code of Practice for Masonry use. Structural use of unreinforced masonry.
- Supervision of installation and the inspection of Pre-set Foundation Bolts (Anchor Bolts) for Passenger Boarding Bridge Rotunda Foundation as per technical requirements for steel & aluminum structures functional tolerances and permitted deviation to BS EN1090-2:2018 (EN 1090-2:2018 (E)) - Execution of Steel and Aluminum Structures: Part 2.
- Supervision of welding fabrication, Welding filler/consumable electrodes (E4303) testing for chemical composition and mechanical strengths of welds as per BS EN 10025-2:2019.
- Supervision, Evaluation and Inspection of Non-Destructive Testing Procedures and Acceptance criteria to BS EN 1SO 17640:2018 on Weld joints and Integrity of Steel works (Steel tube elements for roof Space-Truss, Embedment for Curtain wall structure) for welding defects and/or flaw determination and assessing the type, category and thickness and assurance of material integrity and product quality.
- Magnetic Particle Testing (MPT) to BS EN ISO 23278:2009 for surface and/or near surface defects in ferromagnetic materials.
- Ultrasonic Testing (UT) to BS EN ISO 11666:2008.
- Ethiopian owned Tanzania Based Multidisciplinary Infrastructure Engineering Consultancy Company
Site Engineer
LI JUN DEVELOPMENT CONSTRUCTION COMPANY LTD
Moshi, Tanzania
09.2017 - 03.2022
- Supervision of steel reinforcements fixing for first floor columns, second floor beams slab and roof beams for both wing A&B for Executive and standard hostel blocks that involved Steel cutting, bending, and fixing to BS 8666: Bar bending and shapes.
- Supervision of formwork erection, and fitting for first floor columns, second floor beams, slab and roof beams for both wing A&B for Executive and standard hostel blocks Timber formwork fitting to slab soffit and beam sides to BS 5975: Safe working properties for Formwork, BS 5268: Sheet material shear stresses.
- Supervision of Batching by volume for the concrete ingredients 1:1.5:3 for 0.5W/C (cement, sand, aggregates and water) suitable for C25 mix per design code.
- Supervision of 'Type 4' steel scaffold tube erection for walls' external works for both blocks.
- Supervision of finishing/Rendering work (for both Internally and Externally) 12 mm first coat of cement and sand (1:6) for recreational center block to BS EN 13914-1: Mixes for Rendering.
- Supervision of Timber roof truss fabrication and installation to BS 5268: 2002 Structural use of timber, EN 912: Timber Fasteners-Specifications for Connectors for Timber.
- Supervision of Installation of roof covering IT sheeting materials for both wing A&B for Executive and standard hostel blocks.
- Undertaking site meetings and preparation of Contractor's monthly progress reports.
- Chinese owned Tanzania Based First Class Building Works Construction Company
Site Engineer
BUILDERS&LIME WORKS COMPANY LTD
, Tanzania
04.2018 - 07.2018
- Light reshaping of gravel road section, compaction to specification.
- Re-gravelling of the section to an extra 150 mm thickness.
- Construction of R.C cast in-situ pipe culverts (900 mm Ø).
- Excavation of catchwater drainage trenches (rectangular shape with a section size 1000 mm × 1500 mm).
- Excavation of miter drains along the reshaped road section.
- Construction of stone masonry protection structures (i.e., retaining walls).
- Locally owned Tanzania Based 3rd Class Civil Works Construction Company
Education
B.Sc. - Civil Engineering
University of Dar es Salaam - College of Engineering and Technology (CoET)
TanzaniaAdvanced level Certificate of Secondary Education-(ACSE) - Advanced Physics, Chemistry and Mathematics
Same Secondary School
Ordinary level Certificate of Secondary Education-(ACSE) -
Mboni Secondary School
Skills
- Onshore civil engineering
- Structural design
- Management and execution
- Technical specifications production
- Construction methodologies
- Health and Safety awareness
- Sub-contractors coordination
- Road construction techniques
- Maintenance techniques
- Revenue/capital monitoring
- Design Manuals for Building structures
- Design Manuals for Roads
- Design Manuals for Bridges
- Design Manuals for water works
- Budgeting
- Financial monitoring
- Problem solving
- Risk management
- Civil engineering CAD
- Structural design software
- MASTERSERIES
- StaadPro V8i
- Proctastructure Suite
- Tekla Structural Designer 2022i
- Autodesk AutoCAD Civil 3D
- AutoCAD 2D
- ArchiCAD
- Management software
- Planning software
- Scheduling software
- Gantt Project
- MS Project
- MS Office Suite
- Drainage structures
- Water retaining structures
- Analyzing construction details
- Interpreting construction information
- Communication skills
- Clarity and sound judgment
- Proactive work ethic
- Creative design skills
- Motivational skills
- Leadership skills
- Team player
- Enthusiastic attitude
Certification
Registered Professional Engineer, Engineers Registration Board (ERB)-Tanzania, Peng(T). 8873
References
- QS Zakayo Ndelekwa Nnko, Company Quantity Surveyor, LI JUN DEVELOPMENT CONSTRUCTION COMPANY LTD, +255 (0) 755 801 482, nnkozakayo@gmail.com, P.O BOX 1554, Moshi Municipality, Kilimanjaro
- Engineer Xu Geng Sheng, Managing Director, LI JUN DEVELOPMENT CONSTRUCTION COMPANY LTD, +255 (0) 754 658 659, ljdconstructionltd@yahoo.com, P.O BOX 1554, Moshi Municipality, Kilimanjaro
- Engineer Shegaw Berhanie Bitew, Resident Engineer, BEZA CONSULTING ENGINEERS PLC, +255 (0) 756 664 034, elbirdu@gmail.com, P.O BOX ..., Addis Ababa, Ethiopia
Training
Construction Contracts Management, Claims & Dispute Resolutions under FIDIC Condition of Contracts, Institute of Engineers Tanzania, 03/01/23
Personal Information
Title: Professional Civil Engineer
Certification Statement
I, the undersigned, certify that to the best of my knowledge and belief, this CV correctly describes me, my qualifications, and my experience. I understand that any wilful misstatement described herein may lead to my disqualification or dismissal, if engaged., 03/18/25, ________________________
Languages
English
Advanced
C1
Timeline
Assistant Structural Engineer and Works inspector
BEZA CONSULTING ENGINEERS PLC LTD
04.2023 - Current
Site Engineer
BUILDERS&LIME WORKS COMPANY LTD
04.2018 - 07.2018
Site Engineer
LI JUN DEVELOPMENT CONSTRUCTION COMPANY LTD
09.2017 - 03.2022
B.Sc. - Civil Engineering
University of Dar es Salaam - College of Engineering and Technology (CoET)
Advanced level Certificate of Secondary Education-(ACSE) - Advanced Physics, Chemistry and Mathematics
Same Secondary School
Ordinary level Certificate of Secondary Education-(ACSE) -
Mboni Secondary School